Double Cone Rotary Vacuum Dryer for The Vacuum Drying and Mixing of Powder and Granular Materials in The Pharmaceutical, Food and Chemical Industries

Overview

Basic Info.

Model NO.	SZG
Heating Mode	Transmission
Material Status	Powder, Strap, Bulk
Drying Medium	Superheated Steam
Operational Method	Continuous
Type	Vacuum Disc
Designed Pressure in The Tank	-0.1-0.15 MPa
Material of Equipment	Stainless Steel
Operation Pressure	Vacuum Disc
Condition	New
Application	Medicine, Chemicals, Food Processing
Transport Package	Wooden Box
Trademark	KEXIANG
Origin	Jiangsu, China (Mainland)

Packaging & Delivery

Package Size 2160.00cm * 800.00cm * 1750.00cm Package Gross Weight 800.000kg

Product Description

SZG series double cone rotary vacuum dryer

Introduction: SZG series double cone rotary vacuum dryer is a new type of dryer that integrates mixing and drying. The condenser, vacuum pump and drying equipment to complement the vacuum drying device. (If you do not need to recover the solvent, the condenser can be used) This machine has an advanced design, simple internal structure, easy to clean, the material can all be discharged, easy to operate. It can reduce the labor intensity and improve the working environment. At the same time, because the container itself rotates when the material also rotates, but the material does not accumulate on the wall, so the heat transfer coefficient is high, the drying rate is large, not only save energy, and the material dries evenly and fully, with good quality. It can be widely used in the drying of pharmaceutical, chemical, food, dye and other industries.

Product Parameters

Technical Parameters of SZG Rotary Vacuum Dryer

Model	100	350	500	750	1000	1500	2000	3500	4500	5000
Volume (L)	100	350	500	750	1000	15000	2000	3500	4500	5000
Maximum Loading Volume (L)	40	140	200	300	400	600	800	1400	1800	2000
Maximum Loading Capacity (kg)	20	70	100	150	200	300	400	700	900	1000
Rotating Speed (rpm)	3~13					6	5	4	4	4
Motor Power (k w)	0.75	1.1	1.5	2.2	3	4	5.5	7.5	11	15
Floor Area (mm)	2160 × 800	2160 × 800	2350× 800	2560 × 1000	2860 × 1300	3060 × 1300	3260 × 1400	3760 × 1800	3960 × 2000	4400 × 2500
Rotation Height (mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100	4200
Design Pressure In Container (MPa)	-0.09 to 0.096
Interlayer Design Pressure (MPa)	≤ 0.3
Weight (kg)	800	1100	1200	1500	2800	3300	3600	6400	7500	8600

Product Description

SZG double cone vacuum dryer is a new type drying equipment which combines similar product technologies at both home and abroad. This rotary vacuum dryer possesses belt and chain two-stage elastic connection modes. With low center of gravity, this drying machine can operate smoothly. Heating medium and vacuum system adopt reliable mechanical seal or rotating joint, so as to avoid defects such as the regular packing seal is easy to leak. On this basis, we modify this double cone vacuum dryer. It not only embodies the humanized design concept but also meets the GMP standards.

Equipment flow

Features

Features of SZG Double Cone Vacuum Dryer
1. This rotary vacuum dryer has advanced design, simple internal structure, convenient to clean and easy to handle.
2. The tubes of heating medium and vacuum system are built in the rack in order to prevent artificial damage and difficult clean.
3. The outer wall and rack sealing plate adopt polishing treatment, and the inner container adopts mirror polishing treatment.
4. The materials in the double cone vacuum dryer can be rotated due to the revolution of the machine, which can minimize material water content (≤0.5%).
5. The materials will not stick to the wall of the container. With big drying rate and energy saving, this rotary vacuum dryer can uniformly and sufficiently dry the materials.
6. Condenser and recycling tank are equipped for recovering organic solvent.
7. Our double cone vacuum dryer has three types of heat source, including steam, hot water and conduction oil.

Work Principle

SZG series double cone rotary vacuum dryer for the double cone of the rotary tank, the tank in the vacuum state, to the jacket into the heat conduction oil or hot water for heating, heat through the tank wall and wet materials in contact. The water vapor or other gas evaporated after the wet material absorbed heat is pumped away through the vacuum exhaust pipe by the vacuum pump. Because the tank body is in a vacuum state, and the rotation of the tank body makes the material constantly up and down, inside and outside turning, so it speeds up the drying speed of the material, improves the drying rate, and achieves the purpose of uniform drying.

Application

This machine is suitable for the vacuum drying and mixing of powder and granular materials in the pharmaceutical, food and chemical industries, and is especially suitable for drying by the following requirements.
1,Heat-sensitive materials that cannot accept high temperatures
2,Materials that need to recover solvents and toxic gases
3,Easy to oxidize, dangerous materials
4,Materials with requirements for crystalline form
5,Require residual volatile content of very low material
Recommend Products

Company Profile

Changzhou Kexiang Drying Equipment Co., Ltd. is located in Jiaoxi Town, Changzhou, the hometown of drying equipment. It is the leading manufacturer of drying equipment and vacuum dryer design and production. Various types of granulation, drying, mixing and other equipment have been developed into 28 categories, more than 200 specifications and varieties. The founder of the company has been committed to vibrating fluidized bed, drying equipment, vacuum dryer, hot air circulation oven for more than ten years, Development, production and operation of double cone rotary vacuum dryer. Manufacturers of hot-air circulation ovens attach great importance to science and technology, and have successively cooperated with medical design institutes, the Ministry of Chemical Industry, the Ministry of Chemical Industry and a number of scientific research institutions in Shanghai, Wuhan, Chongqing and other places to develop, and there is a new product market every year.
Kexiang Drying wholeheartedly cooperates with new and old customers, adheres to the business policy of "being trustworthy and enterprising", and takes customer satisfaction as the ultimate goal.

FAQ

1. Q: What is your production lead time? A: Generally speaking, samples take 1-3 days and mass production takes 15-30 days, also depending on your requirements.2. Q: What are your payment options? A: Alibaba Trade assurance, T/T , L/C, Western Union, Cash After sigh the contract pay the 30% deposit of total purchase price and pay the full amount before shipment.3. Q: What is the warranty period for your products? A: We provide one-year warranty for the products.4. Q: Are you a trading company or a manufacturer? A: We are manufacturer. Welcome to visit our factory and check our products.If you have any other questions, don't hesitate to contact us!